In Stock / Special Offers

 

Single Micro-channel Plates (detection quality)

MCP 50 mm rimless L/D 60:1 EDR

some tiny dark spots in imaging due to small dislocations of the pore grid

 

  • Outside Diameter: 50.04 mm
  • Quality Diameter: 40.00 mm (Minimum)
  • Center-to-Center Spacing: 32 µm
  • Pore Size: 25 µm
  • Bias Angle: 12° +- 1°
  • Open Area Ratio: 60%
  • Gain @ 900 Volts: 400 (Minimum)
  • Gain @ 1200 Volts: 10,000 (Minimum)
  • Maximum Specified Operating Voltage: 1200 Volts
  • extended dynamic range
  • low resistance range (5 - 15 MΩ)
  • extended lifetime
  • Test/Inspection Level: Detection Quality

1190 699 €


Time-to-Digital Converter (TDC) with USB 2.0 interface

 


  • low voltage TTL inputs, common start input usable as reset of the internal clock
  • resolution adjust mode: quartz-accurate, insensitive to temperature variations, no calibration necessary
  • 8 channels at normal resolution of 120 ps, measurement range 5 ns - 7.8 µs in start-stop operation
  • 4 channels at high resolution of 60 ps, measurement range 5 ns - 3.9 µs in start-stop operation
  • all channels provide a precisely equal resolution
  • no minimum time limit for hits at different channels
  • max. data acquisition rate of 2.5 million results per second (randomly distributed for all used stop channels in total)
  • USB 2.0 interface

 

Datasheet (PDF)

2650€ SOLD OUT

Please contact us for detailed information on our GPX-based TDCs.



Four Channel Pulse Amplifier Module
(inverting amplifiers, non-inverting on request)

 

Quad TDC
  • - 4 Channel version in 1/12 NIM unit
  • - wide output range of +-2V
  • - gain fixed, depending on bandwidth (24 dB for 100 MHz, 20 dB for 1 GHz)
  • - LEMO-type connectors
  • - bandwidth up to 1 GHz (higher bandwidth on request)
  • - extremely high slew rates
  • - thermal gain stability < 0.006 dB/K
  • - typical SNR loss < 6.5 dB

830 €



High Voltage Power Supply for Electron Multipliers

Single HV supply (dual channel versions and higher voltage ranges available on request)

 


  • Single Channel HV-Supply up to 4 kV (positive and negative versions available)
  • Floatable or non-floatable layout available (+99€ for floating option)*
  • Floating potential up to +-1 kV (more if maximum total output voltage stays below 5 kV)
  • SHV-type connector
  • 0.6 mA maximum output current

999 €*

 

« back to products overview


Banner